Preces kods: D12/400/DUAL
3D printeris Wanhao Duplicator D12/400 – Dual Extruder – 400*400*400mm
|drukāšanas izmērs [mm]||400*400*400|
|Drukāšanas ātrums [mm/s]||≤150 mm/s (depends on material)|
|Slāņa biezums [mm]||0.1-0.4mm|
|Sprauslas diametrs [mm]||2 x 0.4mm|
|sprauslas temperatūra [C°]||255|
|Atbalstītie materiāli||PLA, PETG, any filaments melt =<260 C|
|Materiāla diametrs [mm]||1.75|
|Virsmas temperatūra [C°]||105|
|Savienojumi||USB, SD Card. wi-fi|
|Displejs||ir, 5", skārienjūtīgs|
Divas printera galvas, kas ļauj drukāt ar 2 materiālem vienlaikus!
Wanhao is back again with an exceptional price performance ratio with their new 3D-Printer.
The main features of this new printer are:
- Two color printing
- Dual extruders to one hotend
- Good build volume 400x400x400mm
- 3,5” Touch screen with preview function
- WIFI support
- Filament sensor
- Power failure resume printing
- Quit TMC2209 stepper drivers
- Adjustable Belt Tensioner
Built around a frame with high quality aluminium profiles this sturdy machine achieves stunning results.
You can print with two different colors or use support material like PVA thanks to the design with double extruders feeding to one hotend.
Easier than normal dual extrusion as you only need to level one nozzle. Or just convenient to have your two favorite filaments loaded booth at the same time ready for printing.
Nice 5” color display with touch function. Smart and intuitive menu system where you can preview the model being printed.
WIFI support so you can communicate direct with your printer without cables.
Magnetic spring plate makes it easy to remove the printer models after finished print.
New developed MK12 extruder with efficient cooling system for the nozzle. Improved high-torgue feeding mechanism. Small Bowden tube feeding the hotend with less weight on the moving part, this means that you can improve print speeds.
Easy to adjust the X-Axis belt so you can fine tune your print result to get it even more accurate.
Easy levelling with larger levelling nuts that are easy to adjust.
Filament run out sensor with automatic resume
Very easy to assemble even for a novice. Units comes pre-assembled; all you need to do is to fasten a few screws. You will be printing in no-time.