Grozs ir tukšs

Copymaster-PLA-khaki - Copymaster-PLA-1-75mm-1kg-Military-Khaki-PRE-1KG-MIL
Copymaster-PLA-khaki - Copymaster-PLA-1-75mm-1kg-Military-Khaki-PRE-1KG-MIL-26908
Copymaster-PLA-khaki - Copymaster-PLA-1-75mm-1kg-Military-Khaki-PRE-1KG-MIL-26908_1

Preces kods: PRE-1KG-ML

Copymaster Filament PLA – 1.75mm – 1 kg – haki

Ir Rīgas noliktavā.

€25.00 (Cena ar PVN)

(Atzīmējiet 2-4 preces no kategorijas)
Noliktava Ir Rīgas noliktavā.
Ražotājs Copymaster 3D

Tehniskie parametri

Modelis Copymaster PLA
Materiāla tips PLA
Materiāla diametrs [mm] 1.75
Krāsa Haki
Drukāšanas temperatūra [C°] 190-220
Garums rullī [m] 335
Blīvums [g/cm3] 1.24
Svars [kg] 1

Garantija

PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing.

  • Outstanding price to performance ratio
  • PLA is the easiest filament to print with
  • Good for professionals as well as for beginners
  • Good for making high-resolution parts
  • No shrinking after cooling
  • Low risk of warping
  • Low melting point
  • Wide range of attractive colors available
  • No toxic fumes
  • Biodegradable

Copymaster3D PLA also has the benefit of very low shrinkage, this means that you will have very accurate prints, but also that the risk of warping is very low. Even though a heated build platform isn´t required we do recommend it as you will get the best adhesion. To be extra sure that the print sticks well to the build plate we recommend that you use glue stick. It will make the prints stick better but will also make it much easier to remove the print from the build surface once it cools off. If you use the heated bed we recommend a temperature between 30-60°C

Filament Type PLA
Diameter 1,75 mm
Tolerance 0,05 mm
Weight 1,00 kg
Lenght 335 m
Color military khaki
Printing Parameter
Recomended Printing Temp Min 190 ºC
Recomended Printing Temp Max 220 ºC
Recomended Printbed Temperature Min 0 ºC
Recomended Printbed Temperature Max 45 ºC
Recomended Printing Speed Min 40 mm/s
Recomended Printing Speed Max 150 mm/s
Recomended Fan Speed Min 60 %
Recomended Fan Speed Max 100 %
General
Specific gravity 1,24 g/cm3   ASTM D792
Temperature
Heat deflection temp 50 °C
Tensile
Tensile strength 45 MPa
Elongation
Elongation at yield 5,3 %   ASTM D638
Elongation at break 13,3 %   ASTM D638
Flexural
Flexural Strenght 63,64 %   ISO 178
Flexural Modulus 2157    ISO 178
Other
Impact Strength 17 KJ/m2   ISO 179
Apskatīt visus

Līdzīgi produkti

Apskatīt visus

Ja gribiet saņemt vērtīgus padomus, interesantas idejas, praktiskus pieredzes stāstus, kas palīdzētu efektīvāk izvēlēties risinājumus, sazinieties ar mums.