Preces kods: PS-PLAT-175-0750-WH
PrimaSelect PLA Tough – 1.75mm – 750 g – Balts
Jāpasūta, piegāde vidēji 10 darba dienas.
|Materiāla tips||PLA Tough|
|Materiāla diametrs [mm]||1.75|
|Drukāšanas temperatūra [C°]||210-225|
|Spoles izmērs [mm]||200 x 55|
|Kušanas temperatūra [C°]||140-160|
In SELECT Tough PLA we used the well known SELECT PLA formula and changed it. The result is a new kind of filament that we call “Tough”
It has been engineered for strength and durability and put up a fight against ABS.
Tough PLA has a much higher impact resistance than regular PLA and the stiffness is much better than ABS.
Tough PLA is ideal for printing large/very large prints, like prototypes and functional object. All this without worrying about warping and delamination. The material is just as easy to print as our regular PLA – just much stronger.
Tough PLA prints like regular PLA with the temperature set to 210°C-225°C depending on model, printer and color.
Fans should be set to 100% and the heated build plate should be used at a temperature of 60°C-80°C and we recommend PrimaFIX for extra adhesion.
|Specific gravity||ISO 1183||1,21 g/cc|
|MFR 210°C/2,16 kg||ISO 1133||8,75 gr/10 min|
|Tensile strength at yield||ISO 527||46 MPa|
|Tensile strength at break||ISO 527||19 MPa|
Strain at Yield
Strain at Break
|Tensile (E) modulus||ISO 527||2750 MPa|
|Impact strength – Charpy method 23˚C||ISO 179||29,8 kJ/m²|
|Charpy Impact (Kj/m2)||ISO 179||Injection Moulded: 29,8
3DP X-Y: 22,9
3DP Z: 2,2
|Vicat softening temperature B||ISO 306||57°C|