Preces kods: AL2-LU2-10A
Lāzergravētājs Ortur Aufero Laser 2 – 10W
|Lāzera jauda [W]||10|
|Lāzera viļņa garums [nm]||455 ± 5|
|kustības ātrums [mm/s]||160|
|Darba laukums [mm]||390 x 390|
|Izmērs (W x D x H) [mm]||582x580x140|
The Fastest Entry-level Laser Engraver, up to 15,000mm/min when in a stable situation. The engraver is designed with low gravity center of the X-axis, providing more stability.
- 390 x 390 mm Engraving Area
- 9th Ortur 32Bits Motherboard
- 4 Safety Protections
- Ortur 1.8 Series Firmware
- 3rd Generation Laser Focus Compression Tech
- High Precision
A Lot Faster Than the Typical
32-Bit MCU on the 9th Generation Motherboard Stepper motor speeds can be increased from 4000mm/min to 10,000mm/min or even 15,000mm/min thanks to the ESP32 MCU’s motion algorithm and a low center of gravity.
Easy and Fast Installation
Whether or not you have already used a laser engraving machine, this is the best high-performance machine for novices. The installation can be done in under 10 minutes.
A laser filter cover blocks 98 percent of the UV radiation. A light filter cover is attached to the laser head to keep animals from grabbing the laser spot. The laser will immediately shut off to prevent any harm if the machine is tilted or shifted, if the computer fails during engraving or if the motors stop moving.
Newest Compressed Focal Spot Laser Beam Innovations
Cutting depth of up to 12mm thick wood, 10mm acrylic, carving ceramics, and stainless steel can all be done with the latest Aufero Laser 2 5.5W high-compression focal point laser module diode.
LaserGRBL (Free) – Basic and Easy to use
Compatible with Windows from XP to W10 / Linux.Supports JPG / PNG / BMP / DXF / NC, etc.
LightBurn (Paid) – Advanced and highly customizable
Compatible with Windows from XP to W10 / Linux / Mac OS. Supports JPG / PNG / BMP / DXF / NC, etc.