Grozs ir tukšs

PC-EPETG-175-4x0500-STD - EasyPrint-PLA-Value-Pack-1-75mm-4x-500-g-Total-2-k
PC-EPETG-175-4x0500-STD - jpg
PC-EPETG-175-4x0500-STD - EasyPrint-PLA-Value-Pack-1-75mm-4x-500-g-Total-2_3
PC-EPETG-175-4x0500-STD - EasyPrint-PLA-Value-Pack-1-75mm-4x-500-g-Total-2_4
PC-EPETG-175-4x0500-STD - EasyPrint-PLA-Value-Pack-1-75mm-4x-500-g-Total-2_5
PC-EPETG-175-4x0500-STD - EasyPrint-PLA-Value-Pack-1-75mm-4x-500-g-Total-2_6
PC-EPETG-175-4x0500-STD - EasyPrint-PLA-Value-Pack-1-75mm-4x-500-g-Total-2_1
PC-EPETG-175-4x0500-STD - EasyPrint-PLA-Value-Pack-1-75mm-4x-500-g-Total-2_2
PC-EPETG-175-4x0500-STD - EasyPrint-PLA-Value-Pack-1-75mm-4x-500-g-Total-2_7
PC-EPETG-175-4x0500-STD - EasyPrint-PLA-Value-Pack-1-75mm-4x-500-g-Total-2_8
PC-EPETG-175-4x0500-STD - PC-EPETG-175-1000-TBL-23069_3

Preces kods: PC-EPETG-175-4x0500-STD

Komplekts EasyPrint PETG Value Pack – 1.75mm – 4x 500 g (Kopā 2 kg) – Caurspīdīgs, caurspīdīgs gaiši zils, sārts, gaiši zaļš

Ir Rīgas noliktavā.

€52.00 (Cena ar PVN)

(Atzīmējiet 2-4 preces no kategorijas)
Noliktava Ir Rīgas noliktavā.
Ražotājs PrimaCreator

Tehniskie parametri

Modelis Easyprint
Materiāla tips PETG
Materiāla diametrs [mm] 1.75
Krāsa Caurspīdīgs, caurspīdīgs gaiši zils, sārts, gaiši zaļš
Drukāšanas temperatūra [C°] 210 – 235
Garums rullī [m] 168
Spoles izmērs [mm] 180 x 54.5
Blīvums [g/cm3] 1.27
Svars [kg] 0.5


EasyPrint VALUE pack contains 4 x 500 gram spools.
Clear, Transparent Rose, Transparent Light Blue, Transparent Green
Spool fully compatible with all Flashforge printers, fits inside printers like Finder, Dreamer etc… Adapter included so you can change the spool hub diameter.

EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.

EasyPrint PETG  is the perfect addition for you filament collection. It has many unique features which makes it one of the most versatile filaments in our portfolioYou can make beautiful prints in “”vase mode”” with more than 90% light transmission and almost no haze. EasyPrint PETG doesn´t release any toxic or irritating fumes when printing.

EasyPrint PETG has very good interlayer adhesion which makes it extremely easy to print with. If you have a heated build plate we suggest that you use a temperature around 40-60 ˚C

EasyPrint PETG sticks on BuildTak, PEI sheet and glass plate coated with adhesive spray or glue stick.

  • Full weight!
    On every spool of EasyPrint you will have a perfect spooled filament with a weight of 500grams. When you compare price and performance EasyPrint is hard to beat!
  • Wide Temperature span
    Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 210° – 235° C
  • Perfect diameter tolerance
    EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
  • Continuously monitored
    During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
  • Perfect spooling
    When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
  • Non-toxic and biodegradable
    EasyPrint is made from 100% pure virgin material. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PETG and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
  • Length indicator on spool
    Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
  • EasyPrintsticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60° C
  • EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
Material PETG
Diameter 1.75mm
Tolerance ± 0.02 mm
Heated build platform required No, but recommended
Print Temperature 210 – 235° C
Weight Filament 500g
Total lenght on spool 168 m  +/- 1%
Spool Size 180 x 54,5 mm
Spool Hub Diameter 21mm or 54 mm ( Adapter included ) Fits Flashforge printers
Empty spool weight 122g

Technical data

Physical Test method Value
Density ASTM D1505 1.27 g/cm3
Water Absorbation (24 hour immersion) ASTM D570 0.2 %
Rockwell hardness ASTM D785 116 R-scale
Shrinkage ASTM D955 0.2 – 0.5 %
Tensile strenght @ Yield ASTM D638 53 MPa
Tensile strenght @ Break ASTM D638 26 MPa
Elongation @ Yield ASTM D638 5.0 %
Elongation @ Break ASTM D638 70 %
Flexural Strenght ASTM D790 80 MPa
Flexural Modulus ASTM D790 2150 MPa
Izod Impact Strenght (Notched @ 23°(73°F) ASTM D256 90 J/m
Heat Distortion @ 0.455 Mpa ASTM D1003 74° C
Vicat Softening Temperature ASTM D1525 83° C
Light Transmittance ASTM D1003 90 %
Apskatīt visus

Līdzīgi produkti

Apskatīt visus

Ja gribiet saņemt vērtīgus padomus, interesantas idejas, praktiskus pieredzes stāstus, kas palīdzētu efektīvāk izvēlēties risinājumus, sazinieties ar mums.