Grozs ir tukšs

PS-PLA-Metallic-pack-6x260g - PrimaSelect-PLA-1-75mm-6-x-250-g-Metallic-Pack-rot-gruen-blau-silber-gold-grau
PS-PLA-Metallic-pack-6x260g - PrimaSelect-PLA-1-75mm-6-x-250-g-Metallic-Pack-rot-gruen-blau-silber-gold-grau-2
PS-PLA-Metallic-pack-6x260g - PrimaSelect-PLA-1-75mm-6-x-250-g-Metallic-Pack-rot-gruen-blau-silber-gold-grau-1
PS-PLA-Metallic-pack-6x260g - PrimaSelect-PLA-1-75mm-6-x-250-g-Metallic-Pack-rot-gruen-blau-silber-gold-grau-3

Preces kods: 7340002118161

Ir noliktavā

PrimaSelect PLA – 1.75mm – 6 x 250 g – Metallic Pack (Sarkans, Zaļš, Zils, Sudrabs, Zelts, Pelēks)

PLA – 1.5 kg – 1.75 mm

1 noliktavā

€56.00 (Cena ar PVN)

(Atzīmējiet 2-4 preces no kategorijas)
Ražotājs PrimaCreator

Tehniskie parametri

Modelis PrimaSelect
Materiāla tips PLA
Materiāla diametrs [mm] 1.75
Krāsa Metāliski sarkans, zaļš, zils, sudrabs, zelts, pelēks
Drukāšanas temperatūra [C°] 180-210
Kušanas temperatūra [C°] 140-160
Svars [kg] 0.25


PLA is one of the most common used 3d-print materials in the world, it’s non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it’s easy to get great prints. Metallic filament from Prima Creator comes on a black spool and there’s 6 different colors in the box. Polylactic acid (PLA) is a bio-degradable polymer that is produced from lactic acid, which can be fermented from crops such as corn.

With our new PrimaSELECT PLA we have succeeded in making a PLA that should suit most of your needs. PrimaSELECT PLA is a so called modified PLA and is about 12 times stronger than ordinary PLA, this is due to the impact modifier that has been mixed together with the best raw materials that has been carefully selected. In this filament we have also added a “sparkle effect” that makes the print “pop” and glitter.

PrimaSELECT PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.

The results are not far from amazing and the material is extremely strong with very good interlayer adhesion. This also opens up a new world for the use of PLA. Until now PLA has been brittle and not very strong but with this new product you can use it for applications that before you needed ABS for. Due to the very low shrinkage and the fact that you don´t need a heated bed PrimaSELECT PLA is very easy to use in all FDM/FFF printers. Warping is not a factor you have to consider if you use PrimaSELECT PLA and it will also not deform when your prints are done which is common among cheaper materials. The characteristics also makes the filament less prone to absorbing moister which is a huge leap forward and gives you a great benefit when it comes to storage. If your printer is equipped with a heated bed we recommend that you use a temperature setting of 40-60°C.

PrimaSELECT PLA Metallic comes as a pack of 6 x 250gram spools

Why should I use PrimaSELECT PLA?

  • Up to 12 times tougher than regular PLA
  • Very easy to print, even at low temperatures
  • Very small risks for warping
  • It´s biodegradable
  • No unpleasant smell


PLA Metallic red

PLA Metallic green

PLA Metallic blue

PLA Metallic gold

Apskatīt visus

Līdzīgi produkti

Apskatīt visus

Ja gribiet saņemt vērtīgus padomus, interesantas idejas, praktiskus pieredzes stāstus, kas palīdzētu efektīvāk izvēlēties risinājumus, sazinieties ar mums.